Forklift-rated warehouse floors, USDA/FDA-compliant kitchen systems, and healthcare-grade coatings for Central Florida — installed around your operating schedule.
★★★★★ 4.9★ · 100+ Google Reviews · Est. 2016 · Licensed & InsuredCentral Florida runs on logistics and hospitality, and both punish concrete floors. Distribution centers between Orlando and Lakeland take constant forklift and pallet-jack traffic. Tourism-corridor kitchens cycle from fryer heat to hot-water washdown dozens of times a day. Epoxy Creations LLC installs the floor systems built for exactly those conditions — 100% solids epoxy, epoxy mortar, and cementitious urethane — through our dedicated Central Florida team at (321) 328-0030.
Every project starts with an on-site assessment and slab moisture testing, because Florida slabs fail coatings from below far more often than from above. Surface preparation is mechanical — diamond grinding or shot blasting to CSP 2-5 — followed by the primer, base, and topcoat build the specification calls for. Fast-cure systems can return a zone to service in 24–72 hours, and phased scheduling keeps receiving lanes, dining rooms, or patient corridors open while we work.
We have completed 500+ projects across Florida since 2016 and serve Orange, Osceola, Seminole, Lake, and Polk County from Orlando to Kissimmee, Sanford, Clermont, and Lakeland.
Forklift-rated systems with OSHA line striping for I-4 corridor logistics, fulfillment, and cold-storage facilities from Orlando to Lakeland.
Thermal-shock-resistant urethane cement for high-volume tourism-corridor kitchens, hotel food service, and QSR chains.
Seamless, low-VOC floor systems for the clinics, labs, and medical offices growing around Lake Nona Medical City.
Fuel- and hydraulic-resistant hangar floors for general aviation at Orlando-area airfields including Sanford and Kissimmee.
Chemical-resistant epoxy mortar for the manufacturing and assembly operations across Apopka, Sanford, and south Orlando.
Decorative high-gloss epoxy and polished concrete for showrooms, dealerships, and retail along the OBT and I-Drive corridors.
Installed pricing, including diamond grinding and surface preparation. Volume discounts over 10,000 sq ft.
$4 - $8 per sq ft
High-build seamless epoxy for retail, showrooms, and light commercial use.
$3 - $8 per sq ft
Diamond grinding with densifier. Price varies by sheen level.
$5 - $12 per sq ft
Forklift-rated epoxy mortar systems for warehouses and manufacturing.
$12 - $25 per sq ft
USDA/FDA compliant. Thermal shock resistant for commercial kitchens and food processing.
Orlando commercial projects follow a fixed sequence: free on-site assessment with moisture testing, itemized quote, mechanical surface preparation, crack and joint repair, then the coating build. Light foot traffic at 24 hours, full traffic at 72 hours, complete chemical cure at 5–7 days depending on system. For 24/7 facilities we zone the floor and coat section by section — nights and weekends included — so operations never fully stop. OSHA-standard line striping for forklift lanes, walkways, and staging areas is applied under the topcoat so markings last as long as the floor.
Full system specifications are on our commercial flooring page. For specific environments, see warehouse flooring, restaurant & kitchen flooring, and healthcare flooring.
Yes. Phased installation is standard for our Central Florida warehouse work — we coat and stripe one zone at a time, on nights or weekends if needed, so receiving and shipping lanes stay open. Fast-cure systems can return a zone to forklift traffic in as little as 24–72 hours.
We install cementitious urethane systems rated for commercial kitchens, food prep, and dish areas — thermal-shock resistant for hot-water washdowns, with integral cove base and slip-resistant texture. These meet the sanitation requirements Florida DBPR inspectors look for in high-volume tourism-corridor kitchens.
We serve Orange, Osceola, Seminole, Lake, and Polk County — Orlando, Kissimmee, Lakeland, Sanford, Apopka, Clermont, St. Cloud, Lake Nona, and Winter Park — through our Central Florida team at (321) 328-0030.
Yes. We lay out and coat pedestrian walkways, forklift lanes, staging zones, and hazard areas in OSHA-standard colors as part of the flooring system, sealed under the topcoat so markings do not wear off with traffic.
High-build commercial epoxy runs $4–$8 per square foot installed, forklift-rated industrial systems $5–$12, and USDA/FDA-compliant urethane cement $12–$25. Volume pricing applies over 10,000 sq ft — estimates are free and itemized.
Southwest Florida facility? Visit our Fort Myers commercial epoxy contractors page.
Free, itemized estimates from local commercial epoxy contractors. On-site assessments across Central Florida within 48 hours.
Florida Licensed & Insured · $1,000,000+ Liability Coverage · 4.9★ on Google · Est. 2016