Forklift-rated floor systems for Southwest Florida warehouses, restaurants, auto shops, and medical facilities — installed by local crews with minimal downtime.
★★★★★ 4.9★ · 100+ Google Reviews · Est. 2016 · Licensed & InsuredEpoxy Creations LLC has installed commercial and industrial floor coatings across Southwest Florida since 2016. Our crews are based in Lehigh Acres, which means a Fort Myers warehouse, dealership, or restaurant gets a local team — not a traveling installer — for the site visit, the moisture testing, the installation, and any warranty service afterward.
Southwest Florida is hard on concrete floors. High water tables push moisture vapor up through slabs and delaminate coatings that were installed without testing. Salt air corrodes bare concrete near the coast. Summer humidity changes cure windows. We design every system around those conditions: slab moisture readings before we quote, moisture-mitigation primers where readings demand them, and 100% solids epoxy or cementitious urethane systems matched to the traffic and chemical exposure your floor actually sees. Surface preparation is diamond grinding or shot blasting to the specified concrete surface profile (CSP 2-5) — never acid etching.
From 500 sq ft showrooms to 50,000+ sq ft distribution floors, we phase installations around your operating schedule, including night and weekend work, so your business keeps running while the floor goes down.
Forklift-rated epoxy mortar and line striping for distribution and storage facilities along the Alico Road and Metro Parkway industrial corridors.
Oil- and brake-fluid-resistant systems for the dealerships and service centers along US-41 and Colonial Boulevard.
USDA/FDA-compliant urethane cement with cove base for kitchens from the River District to Gulf Coast Town Center.
Seamless, sanitizable floors for clinics, surgery centers, and veterinary facilities across the Lee Health region.
High-gloss decorative epoxy and polished concrete for showrooms and retail spaces that need durability with a finished look.
Fuel-resistant hangar floors and coatings for boat storage and marine service buildings — built for salt-air environments.
Installed pricing, including diamond grinding and surface preparation. Volume discounts over 10,000 sq ft.
$4 - $8 per sq ft
High-build seamless epoxy for retail, showrooms, and light commercial use.
$3 - $8 per sq ft
Diamond grinding with densifier. Price varies by sheen level.
$5 - $12 per sq ft
Forklift-rated epoxy mortar systems for warehouses and manufacturing.
$12 - $25 per sq ft
USDA/FDA compliant. Thermal shock resistant for commercial kitchens and food processing.
Every Fort Myers commercial project follows the same sequence: free on-site assessment with slab moisture testing, itemized quote by system and square footage, mechanical surface preparation, crack and joint repair, then primer, base coats, and topcoat. Light foot traffic is typically possible at 24 hours, full traffic at 72 hours, and complete chemical cure at 5–7 days depending on the system. For facilities that cannot close, we split the floor into zones and coat one zone per night or weekend until the project is complete.
See the full specifications on our commercial flooring systems page, or explore specific systems: urethane cement for kitchens and food service, polished concrete for retail, and quartz epoxy for wet areas.
Most commercial floors in the 2,000–10,000 sq ft range are completed in 2–5 days including surface preparation. Because our crews are based in Lee County, we can typically perform an on-site assessment within 48 hours and schedule installation around your operating hours, including nights and weekends.
Yes. High water tables and coastal humidity make moisture vapor transmission the most common cause of coating failure in Southwest Florida. We test slab moisture before every installation and apply moisture mitigation primers or vapor barriers when readings require them, so the system is warrantied on your actual slab conditions.
We serve all of Lee, Collier, and Charlotte County — Fort Myers, Cape Coral, Naples, Bonita Springs, Estero, Lehigh Acres, North Fort Myers, and Punta Gorda — from our Lehigh Acres base. Larger commercial projects farther afield are quoted case by case.
In many cases, yes. After grinding off the failed coating we evaluate the slab for salt contamination and moisture before recommending repair, skim coating, or full resurfacing with a moisture-tolerant system. We have worked on numerous SWFL facilities restored after Hurricane Ian.
High-build commercial epoxy runs $4–$8 per square foot installed, forklift-rated industrial systems $5–$12, and USDA/FDA-compliant urethane cement $12–$25. Exact pricing depends on substrate condition and square footage — estimates are free and itemized.
Central Florida facility? Visit our Orlando commercial epoxy contractors page.
Free, itemized estimates from local commercial epoxy contractors. On-site assessments across Southwest Florida within 48 hours.
Florida Licensed & Insured · $1,000,000+ Liability Coverage · 4.9★ on Google · Est. 2016